QATD2604 Tractor Front Drive Axle

  • Adopted two-stage deceleration mechanism,and the spiral bevel gear is used to slow down.The two sides are planetary deceleration mechanisms.The transmission ratio is large and the output torque is large.
  • The Whole housing is rigid.
  • Adopted hydraulic multislice differential lock,lock balance,smooth operation,improve the passage of the entire machine under bad conditions.
  • Centralized two-way hydraulic steering cylinder,compact structure,light and flexible steering.
  • Adopted double acting independent oil circuit,full hydraulic front wheel steering,the angle is up to 55°，small turning radius,good possibility.
  • Steering angle sensors may be provided upon request to support unmanned tractors.
  • Suitable for 220-280 horsepower four-wheel drive tractors.

Require a quotation
Main Connection Dimensions
Technical Parameters
Model No.QATD2604
Main transmission ratio2.75
Transmission ratio at wheel6.4
Total transmission ratio17.6
Front-wheel positioning parametersFront-wheel camber angle1°30'
Kingpin inclination angle7°
Kingpin caster angle6°
Toe-in of front wheel(mm）0-2
Maximum steering angle of front wheel55°
Diameter of steering oil cylinder(mm）80
Oil cylinder shank diameters(mm）45
Stroke of steering oil cylinder（mm)138×2
Oil-tube connectorM18×1.5
Differential lock control oil mouthM14×1.5
Differential lock control oil pressure2MPa
Rated capacities(Kg)8500
Output torque(KN)49